|
Products
- 10.00 x 45 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:1 |
85.00€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Green Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9825,"ecProductSku":"FAR_GAR_PGST00052","ecProductPrice":85,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":361} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 11.00 x 50 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
75.30€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Green Trim - Jaws Width 50mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9828,"ecProductSku":"FAR_GAR_PGST00054","ecProductPrice":75.3,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":362} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 10.00 x 45 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
59.80€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Standard Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9823,"ecProductSku":"FAR_GAR_PGST00050","ecProductPrice":59.8,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":363} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 11.00 x 50 x 5 - Standard Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
61.99€
Incl. 20 % TAX
 Oups, Rupture
No current supply on this product currently
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Standard Trim - Jaws Width 50mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9826,"ecProductSku":"FAR_GAR_PGST00053","ecProductPrice":61.99,"ecProductState":"not in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":364} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 181.5 x 124 x 3.2. Individually. Undrilled Disc. (FAR_D018151240032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:8 |
73.80€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 2 Sides, Linings 181.5 x 124 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9791,"ecProductSku":"FAR_GAR_PGST00026","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Aronde.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":365} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 187.5 x 130 x 3.2. Individually. Undrilled Disc. (FAR_D018751300032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
73.80€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 2 Sides, Linings 187.5 x 130 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9792,"ecProductSku":"FAR_GAR_PGST00027","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Aronde.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":366} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 11.00 x 45 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:1 |
88.50€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 4 Front or Rear Jaws - Green Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9821,"ecProductSku":"FAR_GAR_PGST00048","ecProductPrice":88.5,"ecProductState":"in storage","ecProductCategory":"Aronde","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":367} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 11.00 x 45 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
60.78€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 4 Front or Rear Jaws - Standard Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9820,"ecProductSku":"FAR_GAR_PGST00047","ecProductPrice":60.78,"ecProductState":"in storage","ecProductCategory":"Aronde","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":368} Shipping costs from 3.99 € for France
|
|
|
|
Staple Diameter 6mm.
Overall width: approximately 12.5mm,
Overall length: approximately 16mm,
Black,
======================
Ref. Equivalent Manufacturer(s):
- ...
Quantity in stock:966 |
43.76€
Incl. 20 % TAX
 In stock
The packages of the day are gone! This product will be shipped 19.08.2025
{"ecProductName":"Staple Diameter 6mm.","ecProductId":9653,"ecProductSku":"FAR_AGR_00001","ecProductPrice":43.76,"ecProductState":"in storage","ecProductCategory":"Clips and Hardware for Brake Assemblies","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":369} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 4.00 x 30 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X5STD)
- 1.00 x Brake Strap Lining Service; REMOVAL OF THE OLD LINING BY YOUR OWN, Gluing with Baking, Grinding and Breaking of the New Segment. (FAR_GARN_001S)
- 1.00 x REMOVAL OF THE OLD TRIM BY THE CUSTOMER. (VAINFO-00001)
Non-contractual photo.
THIS SERVICE REQUIRES THE CUSTOMER TO DISMANTLE THE OLD LINING.
Installation of new segments by industrial bonding, including a curing cycle.
The lining service includes the supply and installation of friction washers or segments. The customer can choose the shipping costs corresponding to the return of the part. The customer is responsible for shipping the old parts to our warehouse.
The customer must ship the old parts to our address only; there is no collection point.
DOES NOT INCLUDE THE OLD STRAP PROVIDED BY THE CUSTOMER.
Quantity in stock:36 |
62.00€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Staub PP6B - Brake Strap - Standard Quality - Strap Width 25mm, New Padding Thickness 5mm, Padding Service on Your Old Strap. Removal of the Old Padding Carried Out by the Customer.","ecProductId":10014,"ecProductSku":"FAR_GAR_PGST00119","ecProductPrice":62,"ecProductState":"in storage","ecProductCategory":"PP6B","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":370}
|
|
|
|
Products
- 12.00 x 80 x 6 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00080X6STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:7 |
64.40€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Steyr Puch Pinzgauer 710, 712 - 4 Front or Rear Jaws - Standard Trim - Jaws Width 78mm, New Trim Thickness 6mm. Upholstery service on your Old Parts.","ecProductId":9865,"ecProductSku":"FAR_GAR_PGST00082","ecProductPrice":64.4,"ecProductState":"in storage","ecProductCategory":"Pinzgauer 710, 712","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":371} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 12.00 x 80 x 7 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00080X7STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
83.60€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Steyr Puch Pinzgauer 710, 712 - 4 Front or Rear Jaws - Standard Trim - Jaws Width 78mm, New Trim Thickness 7mm. Upholstery service on your Old Parts.","ecProductId":9866,"ecProductSku":"FAR_GAR_PGST00083","ecProductPrice":83.6,"ecProductState":"in storage","ecProductCategory":"Pinzgauer 710, 712","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":372} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 12.00 x 80 x 7 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX0080X7VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:8 |
120.80€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Steyr Puch Pinzgauer 710, 712 - 4 Front or Rear Jaws - Verte Trim - Jaws Width 78mm, New Trim Thickness 7mm. Upholstery service on your Old Parts.","ecProductId":9867,"ecProductSku":"FAR_GAR_PGST00084","ecProductPrice":120.8,"ecProductState":"in storage","ecProductCategory":"Pinzgauer 710, 712","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":373} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 12.00 x 80 x 6 - “Woven” trim on the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00080x6TIS)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:4 |
154.40€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Steyr Puch Pinzgauer 710, 712 - 4 Front or Rear Jaws - Woven Trim - Jaws Width 78mm, New Trim Thickness 6mm. Upholstery service on your Old Parts.","ecProductId":9870,"ecProductSku":"FAR_GAR_PGST00085","ecProductPrice":154.4,"ecProductState":"in storage","ecProductCategory":"Pinzgauer 710, 712","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":374} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 12.00 x 80 x 7 - “Woven” trim on the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00080x7TIS)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
34.40€
Incl. 20 % TAX
 Oups, Rupture
No current supply on this product currently
{"ecProductName":"Steyr Puch Pinzgauer 710, 712 - 4 Front or Rear Jaws - Woven Trim - Jaws Width 78mm, New Trim Thickness 7mm. Upholstery service on your Old Parts.","ecProductId":9871,"ecProductSku":"FAR_GAR_PGST00086","ecProductPrice":34.4,"ecProductState":"not in storage","ecProductCategory":"Pinzgauer 710, 712","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":375} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 2.00 x 30 x 4 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X4VRT)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:25 |
32.80€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Suzuki 500T - 2 Rear Brake Shoes - Green Pad - 30mm Width Brake Shoes, 4mm Thickness New Pad. Padding Service for your Old Parts.","ecProductId":10115,"ecProductSku":"FAR_GAR_PGST00176","ecProductPrice":32.8,"ecProductState":"in storage","ecProductCategory":"FREINAGE AUTO RETRO","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":376} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 2.00 x 30 x 4 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030x4STD)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:35 |
37.68€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Suzuki 500T - 2 Rear Brake Shoes - Standard Pad - 30mm Width Brake Shoes, 4mm Thickness New Pad. Padding Service for your Old Parts.","ecProductId":10114,"ecProductSku":"FAR_GAR_PGST00175","ecProductPrice":37.68,"ecProductState":"in storage","ecProductCategory":"FREINAGE AUTO RETRO","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":377} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 3.00 x 30 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X5VRT)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:48 |
32.07€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"SWM Enduro Grimeca Hubs - 2 Front or Rear Shoes - Green Lining - 25mm Width Shoes, New Lining Thickness 5mm. Lining Service on your Old Parts.","ecProductId":10021,"ecProductSku":"FAR_GAR_PGST00123","ecProductPrice":32.07,"ecProductState":"in storage","ecProductCategory":"SWM Enduro Grimeca Hubs","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":378} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 3.00 x 30 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X5STD)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:48 |
36.64€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"SWM Enduro Grimeca Hubs - 2 Front or Rear Shoes - Standard Lining - 25mm Width Shoes, New Lining Thickness 5mm. Lining Service on your Old Parts.","ecProductId":10020,"ecProductSku":"FAR_GAR_PGST00122","ecProductPrice":36.64,"ecProductState":"in storage","ecProductCategory":"SWM Enduro Grimeca Hubs","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":379} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
- 4.00 x 20 x 4 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00020X4VRT)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:7 |
32.40€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Terrot 125 - 2 Jaws - Green Trim - Jaws Width 20mm, New Trim Thickness 4mm. Upholstery service on your Old Parts.","ecProductId":9988,"ecProductSku":"FAR_GAR_PGST00106","ecProductPrice":32.4,"ecProductState":"in storage","ecProductCategory":"Terrot 125","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":380} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 4.00 x 25 x 4 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00025x4STD)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:12 |
71.80€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Terrot 125 - 2 Jaws - Standard Trim - Jaws Width 20mm, New Trim Thickness 4mm. Upholstery service on your Old Parts.","ecProductId":9989,"ecProductSku":"FAR_GAR_PGST00107","ecProductPrice":71.8,"ecProductState":"in storage","ecProductCategory":"Terrot 125","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":381} Shipping costs from 3.99 € for France
|
|
|
|
Trim rivet,
For brake or clutch shoe,
For clutch disc,
Dimensions 8 x 15 mm,
Individually,
Non-contractual image,
===========================
Ref. Equivalent Manufacturer(s):
- ...
Quantity in stock:1080 |
55.52€
Incl. 20 % TAX
 In stock
The packages of the day are gone! This product will be shipped 19.08.2025
{"ecProductName":"Tube Rivet for Filling 8 x 15 mm. Steel. TP Flat Head. Individually.","ecProductId":9626,"ecProductSku":"FARRIV_1_8150B","ecProductPrice":55.52,"ecProductState":"in storage","ecProductCategory":"","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":382} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 134 x 94 x 3.5. Individually. Undrilled Disc. (FAR_D013400940035STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:5 |
70.48€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Vespa 400 - 2 Sides, Linings 134 x 94 x 3.5 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9861,"ecProductSku":"FAR_GAR_PGST00079","ecProductPrice":70.48,"ecProductState":"in storage","ecProductCategory":"400","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":383} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 8.00 x 30 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:18 |
72.00€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Vespa 400 - 4 Front Jaws - Standard Trim - Jaws Width 29.5mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9863,"ecProductSku":"FAR_GAR_PGST00080","ecProductPrice":72,"ecProductState":"in storage","ecProductCategory":"400","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":384} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 8.00 x 30 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:18 |
64.00€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Vespa 400 - 4 Front or Rear Jaws - Green Trim - Jaws Width 29.5mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9864,"ecProductSku":"FAR_GAR_PGST00081","ecProductPrice":64,"ecProductState":"in storage","ecProductCategory":"400","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":385} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 10.00 x 30 x 4 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X4VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:5 |
35.70€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Volkswagen Type Olympia - 4 Front or Rear Jaws - Green Trim - Jaws Width 30mm, New Trim Thickness 4mm. Trimming Service on your Old Parts.","ecProductId":10080,"ecProductSku":"FAR_GAR_PGST00155","ecProductPrice":35.7,"ecProductState":"in storage","ecProductCategory":"Type Olympia.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":386} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 10.00 x 30 x 4 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030x4STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:7 |
30.90€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Volkswagen Type Olympia - 4 Front or Rear Jaws - Standard Trim - Jaws Width 30mm, New Trim Thickness 4mm. Trimming Service on your Old Parts.","ecProductId":10079,"ecProductSku":"FAR_GAR_PGST00154","ecProductPrice":30.9,"ecProductState":"in storage","ecProductCategory":"Type Olympia.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":387} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 3.00 x 30 x 3 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X3VRT)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:24 |
38.00€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Yamaha 125 AS2 - 2 Front Shoes - Green Lining - 30mm Width Shoes, New Lining Thickness 3mm. Lining Service on your Old Parts.","ecProductId":10122,"ecProductSku":"FAR_GAR_PGST00182","ecProductPrice":38,"ecProductState":"in storage","ecProductCategory":"FREINAGE AUTO RETRO","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":388} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 3.00 x 30 x 3 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X3STD)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:34 |
30.90€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Yamaha 125 AS2 - 2 Front Shoes - Standard Lining - 30mm Width Shoes, New Lining Thickness 3mm. Lining Service on your Old Parts.","ecProductId":10121,"ecProductSku":"FAR_GAR_PGST00181","ecProductPrice":30.9,"ecProductState":"in storage","ecProductCategory":"FREINAGE AUTO RETRO","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":389} Shipping costs from 3.99 € for France
|
|
|
|
Products
- 4.00 x 25 x 4 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX0025X4VRT)
- 1.00 x 2 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_002X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
38.00€
Incl. 20 % TAX
 In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Yamaha XT500C, XT500 - 2 Front or Rear Jaws - Green Lining - Jaws Width 25mm, New Lining Thickness 4mm. Upholstery service on your Old Parts.","ecProductId":9836,"ecProductSku":"FAR_GAR_PGST00058","ecProductPrice":38,"ecProductState":"in storage","ecProductCategory":"XT500C, XT500","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":390} Shipping costs from 3.99 € for France
|
|
|